How To Refinish Dresser Desk Combo
Dresser desk combo – Enter text to check the readability: Vehicle repair lacquering an agency can make such furnishings melt into a modified ornamental system or emphasize the wood’s beauty. First, make sure that the furniture you want to refinish is solid wood. There are many fan and laminate products that are made to resemble wood, but are not and cannot be disassembled for vehicle repair paint.
Remove the old color
Work in a well-lit and well-ventilated place. Place the suits on a cloth to prevent chemical contamination of your floor. Use old clothes as solvent can come on them. Pour a cup of solvent at a time as it can be used. Reconnect the main solvent can between pouring. Apply the solvent to small pieces of dresser desk combo using a brush. Brush a thick layer in one direction and do not switch to the same section several times. It will take a few minutes for the solvent to soften the color. The color will see blisters or bubbles when it’s ready to be scratched away.
Scrape softened paint into sections and dump into the dresser desk combo. Work fast and do not allow remover on the paint. A scrub pad or steel wool can be used to remove paint from stubborn, corner and detailed information. Some areas may require more than one application. After removing paint, scrub wood in water with a fresh scrubbing pad or steel wool. This neutralizes solvents and removes residues. Immediately clean brushes and scrapers. Discard scrub cushions, solvent can and towels. Sand the wood properly with the seed, starting with the lowest number of gravel and ending with the highest. Wrap sandpaper around a slip block for easier grip and application.
Apply the new finishes
Determine how you want refinished dresser desk combo to look. Do you want to paint, paint and clear paint, or simply seal the natural surface of the wood? Water-based products are easier to use, as remediation is done with regular soap and water and does not require additional chemicals. Before any new finish, wipe all dust from the play. Use chemical resistant gloves if you use oil-based paint or paint, or if your skin is sensitive. A simple wax finish can be applied that does not change the natural color of the wood. Use a can of pasta wax, like Johnson’s Paste Wax, and a towel to apply. After grinding and drying, on a thin layer of pasta wax to the woods, work in the grain.
Allow to dry until the surface looks foamy for about 20 to 30 minutes. Buff the surface with a clean towel. A second layer can be applied. With light wood can be colored to match other wooden furniture. Apply the stain in a thin, even draft with a fine brush and allow drying between the strokes until the desired color depth is reached. Dense work either with a wax finish or a compatible (water or oil) clear paint or varnish. A lacquered surface is more resistant to liquidity. Opaque color can also be applied to suits to match the wall color and painted patterns of a decorator theme or subject. Use a sponge or brush evenly to apply a thin layer of paint. Another coat can only be applied when the previous coat is dry.